OM Series IPPBX Software Release Notes V177
Update Time:2020-07-29

Updates of 177.P2 and 177.P3 (27 July, 2020)


New Features

1.The castling rule supports new rules including single-way broadcast, paging, IP multicast.
2.The IP extension supports the Transport Layer Security protection functionality.

Functions improved

1. After login, the pop-up message recommends changing the default administrator password. 
2. A new factory default setting-operator is unable to login with the initial password.
3. In the interface of Trunk>IP Trunk>Register OPTION>Second server, select “fixed” as the Backup method, the Primary server heartbeat detection functionality facilitated to periodically deliver OPTION message to monitor the Primary server.  
4. Move “Access white list” and “Static defense” to Security>Firewall.
5. Revise the phone number attribution database.
6. Extend the duration of the iOS version of WeWei to Nov. 19th, 2020, once the duration expired again, the duration renews and extent automatically by its own.
7. Enable the new functionality of duty schedule. 
8. After the new firmware starts, the original duty schedule keeps working either. Once the new duty schedule configured in the new menu, the original duty schedule is no longer workable, but the new duty schedule is facilitated after then.
9. In the interface of Extension>analog, add a sentence of wording regarding the “Two phones with one number” functionality. (OM500 is not applicable)
10. While enabling the “P2P traversal” functionality, add a sentence of wording regarding: P2P traversal and porting mapping on the ingress router cannot be enabled concurrently; When P2P traversal is enabled, the parameter “Increments of port number” on “Trunk > IP trunk” page is disabled. 
11. In the interface of Extension>analog>setting and Extension>IP>setting, add a button to enable and disable the functionality of Satisfaction survey. By enabling this function, the caller will automatically receive the satisfaction surveys tune asking for their satisfaction feedback. (Only applicable for the UC version)(Refer to the survey result in NeeHau)
12. To prevent the confliction among shortcuts of various keys, remove the keys of *40 for Forced Release functionality.

Problems Fixed

1. When there is an alarm notification facilitating a call to the receiver, the software restarts and the call is forced to be cut off.
2. The call forking is unable to call out from FXO.
3. The outgoing call DID to the extension is unable to be in the waiting queen. 
4. The CDR of the outgoing call hasn’t the “outgoing line” information.
5. Once the “Ethereal capture” function facilitates and the capture procedure starts, this function is unable to be terminated.
6. It is unable to select the DID number in case the DID set as the Inbound route way when configuring the IP trucks in batch. 
7. Selecting “Specialized port for SIP trunks” as the PC model in the Basic>Network leads to the failure of DNS analysis.
8. Selecting “Specialized port for SIP trunks” as the PC model in the Basic>Network leads to the possibility of failure on leaving a message.
9. It is unable to remove the recording data before the date of Jan. 9th, 2018. (OM80E、OM200G and OM500G are not applicable
10. The poor stability of the system in some specific scenarios.
11. After enabling the recording functionality, it is unable to proceed three-way calling and turns into the single-way calling.
12. Some of the issues related to API.
13. After enabling the functionality of Register to multiple ITSPs, the client’s DSN lost afterward, and then SIP registration is a failure.
14. It is unable to share the outgoing calls by using the P2P traversal when connecting the networking. 



Updates of 146.P2 (29 May, 2019)


New features

1.Provides an “Invitation code” button on Extension > IP page, which simplify the registering of WeWei® extension on the mobile phone. Clicking the button creates a message which contains WeWei® extension account information, and you can share the message to a mobile phone through Tencent QQ or WeChat.

Functions improved

1.Updates the certificate of WeWei® iOS. The current certificate will expire on January 7, 2020, and it will update automatically when it expires.
2.Supports New Rock Unified Management System (UMS).
3.Supports logging into the Web GUI by Microsoft Edge browser.
4.Adds a switch of remote support on Application > Remote support page.

Problems Fixed

1.Fixes an issue that prohibits Huawei phones with system version EMUI9.0 from receiving calls by WeWei®.



Updates of 140.P2 (5 December, 2018)


Functions improved

1.Improves the call quality of WeWei under poor network conditions.

Problems Fixed

1.Fixes an issue that could cause not showing proper free space available on internal storage.




Updates of 134.P4 (10 September, 2018)


Functions improved

1.Improves the call quality of WeWei under poor network conditions.


Updates of 134.P3 (25 July, 2018)


Functions improved

1.Support NeeHau.
2.Supports upgrading to the latest version via Auto Provision regardless of which released version the current version is.
3.Optimizes the progress of establishing a call to WeWei app (Android), avoid the issue sometimes WeWei cannot receive calls. 

Problems Fixed

1.Fixed the issue that the global gain settings did not sync the value of each individual line.
2.Fixed the issue that the change from recording in an internal storage to the remote server recording did not take effect immediately.
3.Fixed the issue that several pages could not opened through New Rock cloud.
4.Fixed API issues.
5.Fixed the issue that unable to provision encrypted configuration files via Auto provision.
6.Fixed the issue that unable to disable the “Locally save recordings upon server disconnected” function once enable it.


Updates of 125.P7 (13 June, 2018)


Functions improved

1.Supports upgrading to the latest version regardless of which released version the current version is.
2.On the Basic > Dialing rule page, optimizes options for Dialing method for outbound calls.
3.Changes of default factory settings: 
01[3-5,7-8]xxxxxxxxx is changed to 01[3-9]xxxxxxxxx
 1[3-5,7-8]xxxxxxxxx is changed to    1[3-9]xxxxxxxxx
4.Supports upgrading to the latest version regardless of which released version the current version is.
5.On the Basic > Dialing rule page, optimizes options for Dialing method for outbound calls

Updates of 125.P6 (19 April, 2018)


Functions improved

1.Supports upgrading to the latest version regardless of which released version the current version is.
2.On the Basic > Dialing rule page, optimizes options for Dialing method for outbound calls.

Updates of 125.P3 (28 December, 2017)

New Functions

1.OM200G and OM500 support hot standby mode, with one primary and one standby, when the primary device meets the failure condition, the secondary device will be in active automatically until primary device recovers.
2.Support 802.1X (as a supplicant). (OM80E/OM200G/OM500)
3.Support temporary call recording file storage on the device upon the network failure condition, and allow the recoding server to download the files once the connection is recovered. (OM80E/OM200G/OM500)

Functions improved

1.Simplify the configuration of routing rules on Advanced > Routing table page. (OM80E/OM200G/OM500)
2.Improve the quality of the system audio files. (OM80E/OM200G/OM500)
3.Improve the quality of TTS. (OM80E/OM200G/OM500)
4.Add more conditions for the secretary feature. For example, direct only the extension calls to the boss to the secretary extension. (OM80E/OM200G/OM500) 
5.Support to back up logs into the internal storage. (OM80E/OM200G/OM500)

Problems Fixed

1.Fixed a bug which caused recording stopped even though free space of internal storage is available.  
2.Fixed a bug which generated incomplete recording files with size of 1KB on the recording server.

Updates of 125 (1 December, 2017)


New Functions

1.Support 802.1X (as a supplicant).
2.Support temporary call recording file storage on the device upon the network failure condition, and allow the recoding server to download the files once the connection is recovered.

Functions improved

1.Simplify the configuration of routing rules on Advanced > Routing table page. 
2.Improve the quality of the system audio files.
3.Improve the quality of TTS.
4.Add more conditions for the secretary feature. For example, direct only the extension calls to the boss to the secretary extension. 
5.Support to back up logs into the internal storage. 

Problems Fixed

1.Fixed the issue with search on Extension > IP extension and Trunk > SIP trunk page.

2.Fixed the issue with failure to authenticate an IP extension by its IP address.


Learn more about Software Download Page

About New Rock
Corporate Information
Honor
Contact Us
Partner
Partner Benefits
Join the Program
News
Latest News
Industry Insights
Announcements
Support
Release & Upgrade
FAQ
Application Notes
Training Materials
Demo
Installation & Maintenance
Others
Videos
Contact Us

 +86 21-61202700

 global@newrocktech.com
     5/F Block B, Building 1, 

     No.188 Pingfu Road, 

     Xuhui District, Shanghai

     200231, China