News

News

What can I do if the voice volume is too low (or high) on an extension during the call?

  A.When the voice volume is too low(or high)on an analog extension side or internal party,you can increase(or decrease)the Gain to terminal parameter value by line configuration.Test several values higher(or lower)than default value=0 until you get the normal voice volume.

  If you are using HX4G/MX8G/MX60E/MX120G

  Go to Line-Advanced,increase(or decrease)the Gain to terminal value.

  If you are using OM20G/OM50G/OM80E/OM200G

  Go to Extension-Analog-Advanced,increase(or decrease)the Gain to terminal value.

  A.When the voice volume is too low(or high)on the other side or external party,you can increase(or decrease)the Gain to IP parameter value by line configuration.Test several values higher(or lower)than default value=0 until you get the normal voice volume.

  If you are using HX4G/MX8G/MX60E/MX120G

  Go to Line-Advanced,increase(or decrease)the Gain to IP value.

  If you are using OM20G/OM50G/OM80E/OM200G

  Go to Extension-Analog-Advanced,increase(or decrease)the Gain to IP value.

Contact Us

New Rockers will do our best to support you
Contact with Us now

Copyright © New Rock Technologies, Inc. All Rights Reserved. 沪ICP备15008515号-1