Hardware Reliability Assurance for Converged Communication Systems - Dual Network Port Redundancy

       Redundancy process

  Connect two interfaces, ETH1 and ETH2, to the same LAN or WAN, giving priority to the ETH1 port. When the ETH1 connection fails, the device automatically enables the ETH2 port (about 1.75 seconds).

  There is no obvious perception by users and no system interruption during network switching.

  Supported Models

  OM80E OM200G OM500 OM1000-UC OM8000

       If you have any related needs, you can contact us:

Contact Us

New Rockers will do our best to support you
Contact with Us now

Copyright © New Rock Technologies, Inc. All Rights Reserved. 沪ICP备15008515号-1