News

News

What is the working principle of voice access gateway

  The working principle of voice access gateway mainly involves the conversion, transmission and processing of voice signals, the following is a detailed analysis of its working principle:

  First, the conversion of voice signals

  Voice digitization: the voice access gateway first analog voice signals into digital signals. This is done through the built-in voice codec, the codec supports a variety of voice compression algorithms to ensure clear and stable call quality.

  Digital Signal Compression and Decompression: Another important role of the voice gateway is to compress and decompress digital voice signals. This can effectively reduce the use of communication bandwidth and improve the transmission speed and quality of voice data.

  Second, the transmission of voice signals

  Establishing channels for call control signaling and media stream transmission: By establishing such channels, the voice gateway makes it possible for voice signals to be transmitted between different types of networks. This usually involves network setup and configuration, including the configuration of information such as IP addresses, subnet masks, gateway addresses, and so on.

  Signal Transmission: Once the channel is established, the voice gateway transmits the compressed digital voice signal to the target device via the network interface module. In this process, the voice gateway may dynamically adjust the transmission parameters of the voice signal according to the network conditions to ensure the call quality.

  Analysis and Processing of Voice Signal

  Signal parsing: After receiving the digital voice signal, the voice gateway at the receiving end will carry out parsing operation to reduce the digital signal to analog voice signal. This is also done by the built-in voice codec.

  Signaling Transmission: The voice gateway is also responsible for handling signaling transmissions between the telephone system and the Internet, such as on/off switching, call forwarding, voicemail, and other operations. These signaling transmissions are accomplished through the signaling transmission module.

  System Management and Control

  The management and control module of the voice gateway is responsible for the management and control of the whole system. This includes operations such as device initialization, configuration, monitoring, troubleshooting and recovery. Through the management and control module, users can conveniently manage and maintain the voice gateway remotely.

  V. Components and Workflow

  Components: Voice gateway is usually composed of switch, voice codec module, signaling transmission module, network interface module and management control module. Each part is responsible for different functions, and work together to complete the conversion, transmission and processing of voice signals.

  Workflow: The workflow of the voice gateway mainly includes steps such as digitization of voice signals, signal transmission, signal analysis and signaling transmission. In each step, the voice gateway will process the voice signal according to the configuration and algorithm to ensure the clarity and stability of the call.

  Summary: The working principle of voice access gateway is to convert analog voice signals into digital signals with compression and decompression processing, and then transmit them to the target devices through the network interface module, and perform the parsing and restoration operation at the receiving end. At the same time, the voice gateway is also responsible for handling the signaling transmission between the telephone system and the Internet as well as the management and control of the whole system. The realization of these functions depends on the various components of the voice gateway and the corresponding workflow.

Customer-centric, focus on customer value

Consult now

Copyright © New Rock Technologies, Inc. All Rights Reserved. 沪ICP备15008515号-1