We provide downloadable documents such as user manuals, product datasheet, product brochures, product leaflets, etc.
Support
Configuration on Elastix®
1. On PBX > PBX Configuration > Trunks page, click Add SIP Trunk to add a SIP trunk.
2. Fill in Trunk Name for both General and Outgoing Settings.
type=peer
4. On PBX > PBX Configuration >Inbound Routes page, fill in DID Number (it can be any number, please remember it, for you will use it when you configure the gateway).
5. Choose IVR in Set Destination.
Configuration on MX100G-S Gateway
1. On Basic > SIP page, fill in Elastix® IP address in the Proxy server field.
2. On Routing > Routing Table page, fill in routing rule shown as below (Suppose MX100G-S has 1 E1 port) for directing calls from Elastix® to ISDN: IP X ROUTE ISDN 1.
3. On ISDN > ISDN 1, make sure Status is Link up in ISDN layer and Status is In Service in ISDN-D channel.
ISDN x ROUTE IP 192.168.250.222:5060
Dialing Method
- For making calls from ISDN to Elastix® through MX100G-S gateway, the caller dial the number of ISDN line connected to gateway’s E1 port, then dial the extension number of Elastix® after hearing the IVR.Configuration on Elastix®
1. On PBX > PBX Configuration > Trunks page, click Add SIP Trunk to add a SIP trunk.
2. Fill in Trunk Name for both General Settings and Outgoing settings.
type=friend
4. On PBX > PBX Configuration > Inbound Routes page, fill in DID Number (it can be any number, please remember it, for you will use it when you configure the gateway).
5. Choose IVR in Set Destination.
Configuration on MX100G-S Gateway
1. On Basic > SIP page, set Elastix® IP address 192.168.250.222 as registrar server and proxy server, fill in User name and Password (the same as the username and the secret in Elastix®).
2. In ISDN > ISDN 1, make sure Status is Link up in ISDN Layer and Status is In Service in ISDN-D channel.
3. In Routing > Routing Table, fill in routing rules to direct incoming calls from IDSN to Elastix®. (Because 8888 is the inbound number of Elastix®, so here it will replace the calling party number to 8888 send to Elastix® and go to the Elastix®’s IVR )
Dialing Method
- For making calls from ISDN to Elastix® through MX100G-S gateway, the caller dial the number of ISDN line connected to gateway’s E1 port, then dial the extension number of Elastix® after hearing the IVR.- For making outgoing calls from Elastix® extensions, the extensions directly dial the outside number.
Tel:021-61202700 / 52217917
Address:5/F Block B, Building 1, No.188 Pingfu Road, Xuhui District, Shanghai 200231, China
Copyright © New Rock Technologies, Inc. All Rights Reserved. 沪ICP备15008515号-1